Aluminum substructure 60x26mm

ab 11,95 

( 11,95  / 1 meter)

The black substructure made of aluminum - suitable for clips and pedestals from BioMaderas, extendable via adapter.

Dimensions

Width 60 mm
Height 41 mm
Size 26 mm
Length 200cm to 400cm

Properties

Material Aluminium
payload 350 kilograms with 50cm axis measurement, 70cm support spacing

Guide

Online patio planner laying plan and get offer
installation instructions terrace guide as PDF
Recommended accessories just tested material
Volume discounts Discount look at
Item: 3760 – 00 Category: Schlagwörter: ,

FLAT ALUMINUM SUBSTRUCTURE

The flat aluminum substructure from BioMaderas was developed for wooden terraces that may only reach a low construction height. The chamber system with two aluminum walls offers the terrace screw a good hold and achieves a high static load. Aluminum is almost indestructible and very dimensionally stable. The rails can easily be shortened with a hacksaw.

Please ensure good ventilation and pre-drill the floorboards and substructure. The swelling and shrinking of wood can cause problems when combined with an aluminum substructure if the terrace is not well ventilated and the wood and aluminum have not been pre-drilled.

member of Global Forest & Trade Network of the WWF

Advantages

✓ Brand quality from BioMaderas
✓ specially for BioMaderas- Decking and BioMaderas-Clips
✓ Warp-free aluminium
✓ No tearing out, no loosening of the screws
✓ Flat substructure for terraces with a low installation height
✓ 2 and 4 meters in length for a seamless substructure

Building instructions

The flat aluminum substructure from BioMaderas can be laid directly on a flat and solid surface. Terrace pads are recommended for small height adjustments between the substructure and foundation. If a greater construction height is to be achieved, pedestals from BioMaderas to be worked. BioMaderas Terrace screws or the concealed fastening system from BioMaderas can be installed with the substructure.

Our advice

In our online consultation we explain how a flat aluminum substructure is laid and calculate your material requirements free of charge with our terrace planner for your wooden terrace. Use those too Personal advice our experts. Email us at info@betterwood. De or call us.

installation instructions

Requirement per square meter wooden terrace approx. 2,5 running meters
distance Substructure max. 45-50cm
Distance support points of the substructure Max. 60cm
You can also use ours Building instructions for wooden terraces.
Weight n / A
Size n / A
Product Type

Material

Width

Size

Length

, ,

1 review for Aluminum substructure 60x26mm

  1. christian dr Gardener (via Google) -

    Excellent advice, best quality and smooth processing. The delivery to the Canary Islands(!) was fast, problem-free and comparatively cheap. Absolutely recommendable, thank you very much!

Add your rating

Share cart