Aluminum substructure 64x41mm black
from 17,95 €
The black aluminum substructure is designed in such a way that the screw sits in two layers of aluminum and therefore has a very good grip. The depression on the top corresponds to the thickness of a BioMadera's Clips and thus ensures an improved support of the board.
Online patio planner| Width | 46 mm |
| Height | 41 mm |
| Length | running meter, 220cm |
| Material | Aluminum black anodized |
| Payload | 350 kilograms with 50cm axis measurement, 110cm support spacing |
| Online patio planner | laying plan and get offer |
| installation instructions | terrace guide as PDF |
| Recommended accessories | only tested material |
| Volume discounts | Discount more blog posts |
ALUMINUM SUBSTRUCTURE BY BIOMADERAS
The black aluminum substructure of BioMaderas was specially developed for the properties of the BioMaderas decking developed from tropical wood. The profile resists stresses that can occur with hardwood decking. It remains distortion-free and practically indestructible. With the connection adapters The construction rails can be connected to each other. The rails can be easily shortened with a hacksaw. Please ensure good ventilation and pre-drilling the floorboards and substructure. The swelling and shrinking of wood can lead to problems when combined with an aluminum substructure if the terrace is not well ventilated and the wood and aluminum have not been pre-drilled.
Advantages
✓ Brand quality from BioMaderas
✓ specially for BioMaderas decking and BioMaderas Clips
✓ Warp-free aluminium
✓ No tearing, no loose screws
✓ suitable for terraces with a low installation height
✓ Extension through adapter connection is also possible
Consulting
| Requirement per square meter wooden terrace | approx. 2,5 running meters |
| distance Substructure | max. 45-50cm |
| Distance support points of the substructure | Max. 110cm |
| You can also use ours Building instructions for wooden terraces. |
Building instructions
The aluminum substructure of BioMaderas can be laid directly on a flat and solid surface. Are recommended patio pads for smaller height adjustments between substructure and foundation. If a greater installation height is to be achieved, this can be done with Pedestals from BioMaderas be worked. The aluminum substructure can be connected to the connection adapters extend as desired. BioMaderas terrace screws or concealed fastening system from BioMaderas can be installed with the substructure. The screw holes should always be pre-drilled.
Customer gallery wooden terraces
Visit our customer gallery and read the testimonials of our decking wood customers.
customer gallery
Shipping costs
Finger-jointed terrace wood
Finger-jointing is a tried-and-tested wood connection in timber construction, through which individual pieces of solid wood are put together to form a longer piece of decking wood. Wedge-shaped prongs on the ends of the pieces of wood interlock and are weatherproof glued together. This can be seen on the surface of the plank, but fades into the background with weathering and the formation of the patina.
Finger-jointing offers various advantages: the wood is less prone to warping and the tree trunk can be used more efficiently, which makes the product particularly sustainable and usually also cheaper.
Comparison of terrace wood
What our selected decking wood has in common: ✓ high durability ✓ very good technical properties ✓ sustainable origin. Here is an overview of the special features:
Cumaru
✓ best durability
✓ particularly robust and scratch-resistant
✗ partly rough surface
✗ high power development
Tip: Floorboards should be sanded after weathering.
garapa
✓ smooth surface
✓ homogeneous, light color
✗ Ferrous substances lead to discolouration
✗ unbolted tendency to warp
Tip: Terrace cleaning removes discoloration and professional interim storage avoids warping.
jatoba
✓ smooth surface
✓ Rich color and grain
✗ unoiled tends to crack
✗ Colored ingredients wash out
Tip: Clean and oil decking after laying.
Teak
✓ best durability and dimensional stability
✓ Lowest risk of cracks and splinters
✗ relatively expensive
✗ no very long planks
Tip: Lay decking boards together.
Accessories for wooden terraces
Only work with accessories that have been tested and approved for use with this particularly resistant type of wood. Ask the manufacturer about suitability or choose products from our range that have already been tested for the specific application. You will find an overview of the accessories required for your terrace construction on this page grocery list. You will receive an individual and free calculation if you use our terrace planner use.
Recommended accessories
Discounts at Betterwood
At Betterwood you get 1% discount for every €1.000 worth of purchases, up to a maximum of 15%. You can calculate your expected savings here:
The discount will be displayed on the shopping cart page and deducted from your purchase.
| Weight | n / A |
|---|---|
| Size | n / A |
| Product Type | |
| Brand | |
| Material | |
| Width | |
| Length |
Be the first to review “Aluminium substructure 64x41mm black”
You need to make logged in to be able to give a rating.
Installation instructions in German (PDF)
Our installation instructions will help you build your wooden terrace. Please read these carefully before installing the floorboards.
Installation instructions english (PDF)
Our installation instructions will help you with the construction of your wooden decking. Please read them carefully before installing the boards.
Similar products
Terrace wood
Reviews
There are no reviews.