Eiermann table frame for wooden tops
The design classic by Egon Eiermann and Adam Wieland impresses with its clear form and lack of functionality - unchanged and proven for over 50 years. In combination with a teak table top, this creates high-quality dining tables and desks of lasting quality.


Plate-frame combination
First decide on a table top – either in ours standard dimensions or from our individual cuts. The optimal dimension for your table frame results from the top dimensions.
Plate | frame | |
depth | 70 - 80 cm 80 - 90 cm 88 - 120 cm |
60cm 70cm 78cm |
Width | 150 - 200 cm 185 - 285 cm |
100cm 135cm |
Wood panel advice
In our online advice you will learn everything about our wooden panels, their care and use in combination with our table frames.


Choose material and color
Choose between different paints, the chrome-plated version or stainless steel. Only polyester-based powder coatings free of heavy metals are used for color refinement. These paints are particularly UV-resistant and guarantee long-lasting color and surface quality. In the case of galvanic finishing, only recyclable and toxicologically harmless finishing processes are used.
choose height
We recommend a lower edge of the table top of 72 cm. If you want to use the optional height adjusters or castors, you should choose the version with a height of 66 cm. If you do not want to use this accessory, choose the height of 72cm.
choose depth
The table top should protrude about 10 cm over the frame on each short side. The depth of the frame should therefore be about 20 cm less than the depth of your table top. This recommendation is mainly for visual reasons, but also serves to ensure stability.
choose width
The table top should protrude about 25 cm to 35 cm over the frame on each long side. The frame width should therefore be 50 cm to 70 cm less than the table top. If you want to sit at the front (e.g. at a dining table), the overhang should be 35 cm to 50 cm. In this case, the frame width should be 70 cm to 100 cm less.