Plate amplifier for Eiermann table support
With the plate amplifier, thinner, larger plates can also be used Eiermann-table frame can be placed. The included foam rubber pads protect the table top.
parts for Eiermann
With our extensive accessories for this Eiermann-Table frame you can tailor your table to your needs.
- height adjuster
- plate amplifier
- cable channels
- Swivel castors
Choose material and color
Choose between different paints, the chrome-plated version or stainless steel. Only polyester-based powder coatings free of heavy metals are used for color refinement. These paints are particularly UV-resistant and guarantee long-lasting color and surface quality. In the case of galvanic finishing, only recyclable and toxicologically harmless finishing processes are used.
choose height
We recommend a lower edge of the table top of 72 cm. If you want to use the optional height adjusters or castors, you should choose the version with a height of 66 cm. If you do not want to use this accessory, choose the height of 72cm.
choose depth
The table top should protrude about 10 cm over the frame on each short side. The depth of the frame should therefore be about 20 cm less than the depth of your table top. This recommendation is mainly for visual reasons, but also serves to ensure stability.
choose width
The table top should protrude about 25 cm to 35 cm over the frame on each long side. The frame width should therefore be 50 cm to 70 cm less than the table top. If you want to sit at the front (e.g. at a dining table), the overhang should be 35 cm to 50 cm. In this case, the frame width should be 70 cm to 100 cm less.
