Aluminum substructure 64x41mm

ab 15,95 

excl. Shipping
Delivery by: March 26st

The aluminum substructure is designed in such a way that the screw sits in two layers of aluminum and thus has a very good hold. The indentation on the top corresponds to the strength of one BioMaderas Clip and thus ensures an improved support of the plank.

Dimensions

Width 46 mm
Height 41 mm
Length 200cm

Features

Material Aluminium
Payload 350 kilograms with 50cm axis measurement, 70cm support spacing

Guide

Online patio planner laying plan and get offer
installation instructions terrace guide as PDF
Recommended accessories only tested material
Volume discounts Discount look at
Article number: 3735-00 Category: Keyword:

ALUMINUM SUBSTRUCTURE OF BIOMADERAS

The aluminum substructure of BioMaderas was specially designed for the properties of BioMaderas-Terrace boards developed from tropical wood. The profile resists stresses that can occur with hardwood decking. It remains warp-free and practically indestructible. The construction rails can be connected to each other with the connection adapters. The rails can easily be shortened with a hacksaw.

Please ensure good ventilation and pre-drill the floorboards and substructure. The swelling and shrinking of wood can cause problems when combined with an aluminum substructure if the terrace is not well ventilated and the wood and aluminum have not been pre-drilled.

member of Global Forest & Trade Network of the WWF

Advantages

✓ Brand quality from BioMaderas
✓ specially for BioMaderas- Decking and BioMaderas-Clips
✓ Warp-free aluminium
✓ No tearing, no loose screws
✓ suitable for terraces with a low installation height
✓ Extension through adapter connection is also possible

Building instructions

The aluminum substructure of BioMaderas can be laid directly on a flat and solid surface. Terrace pads are recommended for small height adjustments between the substructure and foundation. If a greater construction height is to be achieved, pedestals from BioMaderas to be worked. The aluminum substructure can be extended as required with the connection adapter. BioMaderas Terrace screws or the concealed fastening system from BioMaderas can be installed with the substructure. The screw holes should always be pre-drilled.

Our advice

Would you like to know how to lay decking on an aluminum substructure? In our online consultation we explain how an aluminum substructure is laid and calculate your material requirements free of charge with our terrace planner for your wooden terrace. Or use the Personal advice our experts. Email us at info@betterwood.de or call us.

installation instructions

Requirement per square meter wooden terrace approx. 2,5 running meters
distance Substructure max. 45-50cm
Distance support points of the substructure Max. 110cm
You can also use ours Building instructions for wooden terraces.

Weight n / A
Size n / A
Product Type

Material

Width

Length

, ,

Span substructure flat TP

100

Reviews

There are no reviews.

Be the first to review "Aluminum substructure 64x41mm"

Share cart